Lizard Skin Sound Deadening & Insulation Review

As an Amazon Associate, I may earn from qualifying purchases at no extra cost to you.

There are a lot of different products that can help with the sound insulation for your car, thus making sure that there is a little to none external noise coming inside your car.

Some of those products are quite easy to use and apply to your car, but others are a bit difficult to do so, due to certain requirements.

Today we will talk about Lizard Skin Insulation, which is a bit different than, for example, one of the most popular soundproofing materials, Dynamat.

What makes Lizard Skin insulation different is the fact that it is not in the form of hard material per se but in the liquid form of a spray, which makes it much easier to apply on your car.

lizard-skin-insulation-review

Lizard Skin Insulation Review

When it comes to using Lizard Skin Sound Control, it is usually marketed as a product that should be used in combination with Ceramic Insulation and Top Coat.

Ceramic insulation is used for heat resistance, while Top Coat is perfect for endurance, making the material to last much longer.

All three considered together are much more expensive than using Dynamat for example, but if you only want to use Lizard Skin insulation for sound dampening, you don’t have to use all three products.

LizardSkin Sound Control can be found in buckets that weigh 2 gallons and it is recommended to maintain the thickness of between 0.4” and 0.6”.

To help you with that, you can check the markers that are there to help you to measure the correct level of thickness.

If we talk in average numbers, for most cars you will need around 4 gallons of spray, but for some, it is recommended to use 6 gallons.

The Preparation Process

Using the Lizard Skin insulation requires some type of preparation, in order to be completely successful, so let’s see what will you need to get before you start doing it.

One thing to note here is that when you make up your mind and decide to use spray insulation, you will have to do it on the entire car.

With this system, you can’t simply spray one part of the vehicle, while leaving the rest dry. It all has to be covered, or nothing.

So, before you start spraying, you will need to prepare yourself and your car for the entire process, so make sure to read the following part carefully.

Real professionals usually completely strip the car and remove the doors, so they could use the spray in a more effective way.

First of all, you will need to mix the liquid in the can and the best way to do it is to use an extension for a power drill, which is specifically designed for mixing.

Next, in order to apply the spray, you will need to get a specialized spray gun, which can be found in the mixing kit on Amazon.

The process itself is similar to regular painting jobs, so you will need to protect certain parts of the car, where there are holes, bolts, and nuts.

If you don’t do this, it won’t be easy to remove the coating from some of these parts, so take some time and prepare everything before you start.

You can do that by using a masking, duct tapes and plastic sheets where needed. Once everything is set up, you will be ready to start applying the spray.

How to Use Lizard Skin Insulation

After you prepare your car for spraying and make sure the liquid is ready to be used, it is time for you to start applying the Lizard Skin Sound Control on your car.

You should begin by spraying on a small area, so you could easily measure the level of thickness you need to achieve.

When you do that, you will know how much you need to spray the rest of your car, so don’t rush and be patient about this.

This has to be done for every surface of the care, even the ones you removed, such as door, for example, so make sure not to forget that.

After you manage to spray everything once, you should leave it for an hour, then do it all over again, to maximize the efficiency of the insulation.

To get a better notion of how the entire process looks like, feel free to watch this video below, where Marx explains how to properly apply LizardSkin Sound Control insulation.

Sound Dampening Effects of Lizard Skin Insulation

Even though some people think that Dynamat is a better solution for sound dampening your car, there aren’t too many complaints about Lizard Skin insulation either.

Let’s get into a bit further and watch this video where you can see the difference in sound before and after using the Lizard Skin Sound Control insulation.

Pros and Cons of Using Lizard Skin Insulation

Now that you know how the entire process of applying the Lizard Skin insulation even looks like and what tools you may need in order to apply it, let’s discuss some positive and negative sides of using the Lizard Skin Sound Control spray as a way to isolate all external noise from your car.

Pros
  • The process itself is quite easy to do – it does require a lot of preparation and some special tools to use, but after that, it is fairly simple to apply the compound onto the car, so you won’t have to spend a lot of time or having to hire a specialist to do it for you.
  • All parts of the car are protected – most other sound insulation alternatives don’t offer complete coverage of your car. Lizard Skin insulation does, which is one of the most important advantages it has.
  • Dealing with moisture – when using Lizard Skin spray insulation, there is no real harm that could cause moisture to be kept inside.
  • No need to cut anything – with spray insulation, you won’t have to worry about measuring and cutting materials.
  • Price – even though it is not the cheapest option, Lizard Skin insulation is still cheaper than Dynamat, for instance.
Cons
  • Can cause a mess – probably the largest issue with this is that using spray insulation could potentially cause quite a mess if you don’t tread carefully.
  • It’s quite sticky – same as with the paint, you will need to secure certain parts of the car because if you don’t, it will be really hard to clean it after you are done.
  • It could be difficult to use for non-professionals – if you are not experienced with this, or if you don’t have all the tools you need, it can be difficult to use Lizard Skin insulation, so it might be better to call a professional.

Conclusion: On Lizard Skin Sound Deadening

There you go, folks!

Now you can go and get Lizard Skin insulation for your car since now you know how to use it to effectively reduce the outside noise from your car.